Timber Kiln / Dryer

Drying process parameter needed is temperature and humidity. These two parameters could be provide by Air Handling Unit. The only thing that it makes different with Air Handling unit in process room, storage, commercial building is that the temperature is higher but the humidity is as low as possible.

Talking about temperature in timber kiln dryer, may achieved until at least 32oC, with Humidity at maximum at 30% (still need to be adjusted based on the type of the product inside)

General Specification :

Capacity               : 50.000 Btuh – 2.000.000 Btuh

Air Flow                : 500 cfm – 60.000 Cfm

Filter                      : Pre G4

Heating                : Hot Gas / Steam Coil / Hot Water  Coil / Electric Heater

Cooling                 : Chiller / Direct Expansion